Well, some buses have different controls. Maybe you need to press E and then hold E again. I don't fully remember, some buses have a breathalyser but this probably isn't one of them.
Guest•2 weeks ago
1. Turn on the electrics (default: “E” or use your mouse on the key)
2. Insert the card in the tachometer. It is located under the door switches. A simple click will do.
3. Wait for the glow plugs to heat up (heating up is indicated by a symbol lighting up on the main panel,
between the gauges)
4. Start the engine (Default: “M” or use the switch)
5. If the air pressure is too low, wait for a bit, you might as well rev the engine for a while.
6. Deactivate the parking brake.
7. Fasten your seatbelt by clicking on the buckle on the upper left side of the driver’s seat! You can
unbuckle it by pressing the button on the lower right side of the driver.
8. Put on the 1st gear and you’re ready to go!
